Fill out our form with your model of interest and we'll send you a downloadable brochure or technical specifications document.
The Cat® 740 GC features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, stability-assist machine rollover warning system, and a fuel saving ECO mode.
Every Tier 2/Stage II or Tier 3/Stage IIIA equivalent Cat engine is equipped with a combination of proven electronic, fuel, air an…
Advanced Automatic Traction Control (AATC) proactively applies inter- and cross-axle differential locks ‘…
All three axles promote stability using oscillating a-frames with lateral tie rods. Operate at productive…
Spacious cab delivers comfort all shift long and is 7dB quieter than prior model. Unique combination hoist/transmission leve…
Box section front frame absorb is stiff to handle torque loads. Frame design decreases stress at the hitc…
Cat Product Link wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performin…
Caterpillar design, manufacturing and customer service help ensure peak performance and uptime. Long service intervals keep…
Caterpillar designs and functions with great concern for the environment. Cat C18 engine incorporates the Cat Clean Emission…
Seat belt in use indicator (four-point seat belt available as an option) Operator presence detection (prevents gear engageme…
Specification | Value |
Engine Model | Cat® C15 |
Bore | 137 mm |
Stroke | 171.5 mm |
Displacement | 15.2 l |
Emissions | The C15 engine emits either Tier 2/Stage II or Tier 3/Stage IIIA equivalent emissions. |
Net Power - SAE J1349 | 324 kW |
Net Power - ISO 14396 | 330 kW |
Gross Power - SAE J1995 | 335 kW |
Peak Engine Torque Gross (SAE J1995) | 2.320 N·m |
Peak Engine Torque Net (SAE J1349) | 2.264 N·m |
Peak Engine Torque Speed | 1.200 r/min |
No Engine De-rating Below | 3.050 m |
Engine Model - Either U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage IIIA equivalent | Cat C15 |
Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Note (1) | The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
Note (3) | Net power when the fan is at maximum speed is 324 kW (434 hp) per the SAE reference conditions. |
Specification | Value |
Rated Payload | 36.3 t |
Specification | Value |
Heaped (SAE 2:1) | 22.7 m³ |
Struck | 17 m³ |
Tailgate Heaped SAE 2:1 | 24.4 m³ |
Tailgate Struck | 17.9 m³ |
Specification | Value |
Forward - 1 | 6.4 km/h |
Forward - 2 | 8.5 km/h |
Forward - 3 | 11.5 km/h |
Forward - 4 | 14.8 km/h |
Forward - 5 | 19.7 km/h |
Forward - 6 | 24 km/h |
Reverse - 1 | 6.8 km/h |
Forward - 9 | 57.5 km/h |
Forward - 7 | 33.1 km/h |
Reverse - 2 | 15.7 km/h |
Forward - 8 | 39.8 km/h |
Specification | Value |
Interior Cab | 72 dB(A) |
Note (2) | Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Note (1) | The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
Specification | Value |
Rear Axle - Loaded | 23.020 kg |
Center Axle - Empty | 6.709 kg |
Center Axle - Rated Load | 16.534 kg |
Total - Loaded | 68.257 kg |
Front Axle - Loaded | 21.994 kg |
Front Axle - Rated Load | 3.233 kg |
Rear Axle - Rated Load | 16.534 kg |
Total - Empty | 31.956 kg |
Total - Rated Load | 36.301 kg |
Rear Axle - Empty | 6.486 kg |
Center Axle - Loaded | 23.243 kg |
Front Axle - Empty | 18.761 kg |
Specification | Value |
Fuel Tank | 550 l |
Cooling System | 90 l |
Engine Crankcase | 52 l |
Steering/Hoist Hydraulic System | 140 l |
Brake Cooling Tank | 67 l |
Final Drive - Each | 5 l |
Transmission - OTG | 75 l |
Axles - Each | 60 l |
Specification | Value |
Raise Time | 12 s |
Lower Time | 12 s |
Specification | Value |
Lock to Lock | 4.75 seconds @ 60 rpm |
Specification | Value |
Brakes | ISO 3450 – 2011 |
Cab - FOPS | ISO 3449 Level II – 2005 |
Cab - ROPS | ISO 3471 – 2008 |
Steering | ISO 5010 – 2007 |
Specification | Value |
Type | High strength Brinell HB450 wear resistant steel |
Specification | Value |
Turning Dimensions - Steer Angle - Left/Right | 45° |
Turning Dimensions - Aisle Width | 5.595 mm |
Turning Dimensions - Inside Radius | 3.960 mm |
Note | Dimensions are for machines equipped with 29.5 R25 tires. |
Turning Dimensions - Clearance Radius | 8.395 mm |
Turning Dimensions - SAE Turning Radius | 7.698 mm |
Specification | Value |
Side Plates | 11 mm |
Front Plate | 7 mm |
Base Plate | 13 mm |
Specification | Value |
Note | An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
Wheel Loader: 966M - Passes | 4–5 |
Hydraulic Excavator: 352F - Passes | 5–6 |
Wheel Loader: 972M - Passes | 3 |
Wheel Loader: 962M - Passes | 5 |
Hydraulic Excavator: 374F - Passes | 3–4 |
Learn more information about the Cat 740 GC Articulated Truck.
Download (2.22 MB, PDF)From pre-purchase consults to end-of-lifecycle benefits, Mantrac informs, advises and partners with you.
Speak with the Sales Team to learn the latest prices and information on products that can deliver value and help transform your business.
Find the perfect machine or equipment solution by contacting one of our local specialists. They are on standby, ready to help you solve your operational challenges.
Offshore Office
Bisrate Gabriel, Africa insurance building 6th floor. Post Address : 18620